S3107 Micro Servo 9G

Descripción

TECH NOTES

                  This is the S3107 Micro Servo from Futaba.                   
               This servo is used for R/C Park Flyer airplanes.                
                                                                               
         This servo can produce high-current draw from your batteries.         
         If using NiMH or LiPo batteries, make sure they are capable           
                        of delivering sufficient amps.                         
                                                                               
FEATURES: Delivers excellent torque and speed for its small size, light weight 
          3-pole motor                                                         
          Can be used for elevators, ailerons and rudders                      
          One year warranty                                                    
          Nylon gears                                                          
                                                                               
INCLUDES: One S3107 Micro Servo with Futaba J male connector and mounting      
            hardware                                                           
                                                                               
SPECS:    Speed:  .12 sec/60° @ 4.8V                                           
          Torque: 17 oz-in (1.2 kg-cm) @ 4.8V                                  
          Dimensions: 0.9 x 0.4 x 0.8" (7/8 x 7/16 x 13/16")                   
            (22 x 11 x 20mm)                                                   
          Weight: 0.32 ounce (5/16oz) (9.0 grams)                              
          Connector: Male "J" type with approx. 5" wire                        
          Output Shaft Diameter: 5mm                                           
                                                                               
COMMENTS: This servo cannot be used with gasoline engines or large/middle      
            scale gliders or other models that require torque. Use of 6.0V not 
            recommended as this will shorten servo life.                       
          For replacement servo horn use FUTM2005