793 Remote Safety Ignitor


En stock

1 disponibles



       This provides an external glow driver socket that is wired directly     
          to the actual glow plug and grounded to one engine head bolt.        
FEATURES: Can be used on any single cylinder engine.                           
          For use with any car, helicopter, plane or boat where the glow plug  
            is in a hard to reach spot or is close to a propellor.             
          Dust cover is attached with a pin and rotates left or right, opening 
            so glow driver can be inserted into the recessed socket.           
          Ignitor socket is made of black plastic.                             
INCLUDES: One Pre-Assembled Remote Safety Ignitor with Attached Dust Cover     
REQUIRES: Cutting a hole to mount external socket.                             
          Cementing the housing in the hole using CA or epoxy glue.            
SPECS:    Mounting Hole For External Socket: 11/16"                            
          Wire Length: 23-1/2"                                                 
COMMENTS: Difference between standard and recessed ignitors:                   
            "remote safety ignitor" glow plug wire has a loop with another wire
            crossing through it.  Looks kind of like this: @                   
             "remote safety ignitor for recessed glo-plugs" glow plug wire has 
             two wires in a opposing V shape.  Looks kind of like this: ><     
                                                                     JAL 7/9/99


No hay valoraciones aún.

Sé el primero en valorar “793 Remote Safety Ignitor”

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *