S3107 Micro Servo 9G


En stock




                  This is the S3107 Micro Servo from Futaba.                   
               This servo is used for R/C Park Flyer airplanes.                
         This servo can produce high-current draw from your batteries.         
         If using NiMH or LiPo batteries, make sure they are capable           
                        of delivering sufficient amps.                         
FEATURES: Delivers excellent torque and speed for its small size, light weight 
          3-pole motor                                                         
          Can be used for elevators, ailerons and rudders                      
          One year warranty                                                    
          Nylon gears                                                          
INCLUDES: One S3107 Micro Servo with Futaba J male connector and mounting      
SPECS:    Speed:  .12 sec/60° @ 4.8V                                           
          Torque: 17 oz-in (1.2 kg-cm) @ 4.8V                                  
          Dimensions: 0.9 x 0.4 x 0.8" (7/8 x 7/16 x 13/16")                   
            (22 x 11 x 20mm)                                                   
          Weight: 0.32 ounce (5/16oz) (9.0 grams)                              
          Connector: Male "J" type with approx. 5" wire                        
          Output Shaft Diameter: 5mm                                           
COMMENTS: This servo cannot be used with gasoline engines or large/middle      
            scale gliders or other models that require torque. Use of 6.0V not 
            recommended as this will shorten servo life.                       
          For replacement servo horn use FUTM2005  


No hay valoraciones aún.

Sé el primero en valorar “S3107 Micro Servo 9G”

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *